kyma•tweaky . How . ControlPhaseOfOscillator

Question (or Task)

i am struggling with creating a dynamic phase offset for an LFO. i desire to send one LFO to two different hotparameters but offset one slightly from the other. easy enough to do with a delay with zero feedback, but i thought it would be nifty to offset in terms of degrees and have the phase offset adjust based on the frequency of the LFO. i think this would also be a delay that adjust the delay based on the frequeny of the LFO. however, i can't get seem to get it right.

any ideas?

-- BenPhenix - 20 March 2004

Solution(s)

How about if you select Frequency modulation, use a Constant as the modulator, and set the MaxMI to: 

Float pi * 2

Then, in the Value parameter of the Constant, you could use: 

!Degrees / 360.0

to control the phase offset in terms of degrees. (You could set the range of !Degrees from 0 to 360 by editing the VCS).

-- CarlaScaletti - 22 Mar 2004

WebForm
Question: How can I adjust the phase of an Oscillator for use as a dynamic LFO?
Keywords: oscillator, phase, LFO, dynamic LFO, changing LFO, phase modulation

----- Revision r1.1 - 22 Mar 2004 - 20:01 GMT - CarlaScaletti
Copyright © 1999-2014 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding kyma•tweaky? Send feedback.